Ordinary PCB depaneling machines for light strips can only cut a small piece at a time, so the entire board of light strips needs to be cut multiple times, which has low production efficiency.
Multi-blade and multi-group PCB depaneling machines can complete the cutting of the entire panel at one time, with ultra-high depaneling capacity.
ZM30-D multi-blade multi-component panel splitter can cut the entire LED board at one time, improve production efficiency and reduce labor costs. Supports customized non-standard, realizes automatic feeding and plate placement after cutting.
High efficiency, saves a lot of labor costs, and can produce more than 100,000 pieces per day.
Connect with feeding equipment to realize automatic production.
Safety: transparent cover + knife shell, double protection, to prevent harm to operators.
Data monitoring and statistical output: start-up time monitoring, production capacity monitoring.
The upper and lower knife spacing can be precisely adjusted, the accuracy is maintained at ±0.1MM, and the PCB thickness can be between 0.6-3.5mm.
The blade width is 8mm, and it can cut LED light strips above 8mm (LED light strips below 8mm can be customized).
The panel splitter is designed for the glass tube process production of the lighting industry to meet the industry with strict requirements on deformation. The equipment is also suitable for the production of aluminum-plastic tube LED light strips and strip PCB boards.
| project | ZM30-D | ZM30-DC | ZM30-DB |
| size | 2560*685*1160 | 2690*685*1160 | 1900*685*1160 |
| Cuttable length | 100mm-unlimited | ||
| Cutting width | 8-230MM | ||
| Cutting speed | 0-300mm/s | ||
| V-groove thickness | 0.2-3MM | ||
| Component height | ≦12.5mm | ||
| Distance between component and V-groove | ≧3mm | ||
| Voltage | 220V/50Hz（110V/60Hz） | ||
| Air pressure | 0.50-0.70Mpa | ||
| power | 800W | ||
| Blade size | 80*35*8mm（Imported high speed steel, reusable） | ||
| Number of blades | 40 | 20 | |
| PCB compatibility | T5、T8Light Bar | Light Board | |
Application: PCB boards with V-grooves, thickness 0.2 to 3.0 mm, such as aluminum boards, copper boards, FR4 boards, fiberglass, T5T8 light strips, light boards, etc.
